Epson EH-TW8100, User Manual

Page: 70 / 109

Configuration Menu
69
Function Menu/Settings Explanation
Advanced Gamma 2.0, 2.1, 2.2, 2.3, 2.4, 2.5, 2.6 Performs gamma adjustments. You can
select a raw value or adjust the gamma
while looking at the image or graph.
s
p.35
(The values that can be selected change
depending on the
Color Mode setting,
and 2.0 - 2.4 or 2.2 - 2.6 are displayed.)
Customized Adjust it from the im-
age, Adjust it from the
graph
Reset
RGB Offset R/G/B Adjusts the offset and gain for each R, G,
and B color.
s
p.36
Gain R/G/B
RGBCMY R/G/B/C/M/Y Hue, Satura-
tion, Bright-
ness Adjusts the hue, saturation, and bright-
ness for each R, G, B, C, M, and Y color.
s
p.34
EPSON Super
White
*2 *3
On, Off (This can only be set when the Color
Mode is set to Auto , Natural , Cinema ,
or 3D Cinema and when receiving signal
input from the HDMI1 or HDMI2 ports, or
from WirelessHD.)
Set this to
On if you are experiencing
bright over exposure of whites in your im-
age. When set to
On , HDMI Video Range
settings are disabled.
Color Gam-
ut
*4
HDTV, EBU, SMPTE-C Sets the color gamut to match the stand-
ard for the video device being used.
s
p.41
Power Con-
sumption Normal, ECO You can set the lamp brightness to one of
two settings.
Select
ECO if the images being projected
are too bright. When ECO is selected, pow-
er consumption during projection decrea-
ses, and fan rotation noise is reduced.
Auto Iris Off, Normal, High Speed You can change the luminance adjust-
ment tracking for changes in brightness in
the displayed image. Set to Off for no lu-
minance adjustment.
s
p.39
Reset Yes, No You can reset all adjustment values for
Image to their default settings.
*1
This is not displayed when a computer image signal is being input.
*2 This is only displayed when a Component, HDMI1, HDMI2, or WirelessHD image signal is being input.
(WirelessHD is for EH-TW9100W/EH-TW8100W only.)
*3 Settings are saved for each type of input source or signal.
*4
Only EH-TW9100W/EH-TW9100 is displayed.