Configuration Menu
90
Others menu
Function
Menu/Settings
Explanation
AMX Device Dis-
covery
On, Off
When you want to allow the projector to be de-
tected by AMX Device Discovery, set this to
On
.
Set this to
Off
if you are not connected to an en-
vironment controlled by a controller from AMX
or AMX Device Discovery.
Control4 SDDP
On, Off
When you want to allow the projector to be de-
tected by Control4 SDDP, set this to
On
. Set this
to
Off
if you are not connected to an environ-
ment controlled by a controller from Control4 or
Control4 SDDP.
Reset menu
Function
Explanation
Reset network settings.
You can reset all adjustment values for
Network
to their default settings.
Info menu
Function
Menu/Settings
Explanation
Projector Info
Lamp Hours
Displays the cumulative lamp operating time
*
.
Source
Displays the current input source.
Input Signal
Displays the input signal setting of the current input source.
Resolution
Displays the resolution.
Scan Mode
Displays the scan mode.
Refresh Rate
Displays the refresh rate.
3D Format
Displays the 3D format of the signal input during 3D projec-
tion (Frame Packing, Side by Side, or Top and Bottom).
Sync Info
Displays the image signal information.
This information may be needed if service is required.
Color Depth
Displays the color depth and color difference.
Color Format
Displays information on the color space and dynamic range.
Status
This is information about errors that have occurred on the
projector.
This information may be needed if service is required.
Serial Number
Displays the projector's serial number.
Event ID
The application error log appears.
s
Version
Main
Displays the firmware version of the projector.
Video2
*
The cumulative use time is displayed as "0H" for the first 10 hours. 10 hours and above is displayed as "10H",
"11H", and so on.
Summary of Contents for EH-TW7300
Page 1: ...User s Guide ...
Page 19: ...Preparing 18 Overhead view ...
