Epson EH-TW7000, User Manual

Page: 62 / 112

Configuration Menu
61
Signal menu
The Signal menu cannot be set when a LAN image signal is being input.
Function Menu/Settings Explanation
3D Setup 3D Display Auto, 3D, 2D To view 3D images, set this to Auto or 3D .
s
p.46
3D Format Side by Side, Top
and Bottom Sets the 3D format for the input signal.
3D Depth -10 to 10 Sets the depth for the 3D image.
Diagonal Screen
Size 60 to 300 Sets the projection size for the 3D image. By
matching this to the actual size, you can achieve
the optimum 3D effect.
3D Brightness Low, Medium, High Sets the brightness for the 3D image.
Inverse 3D Glasses Reverses the synchronization timing for the left/
right shutters on the 3D Glasses and the left/right
images. Enable this function if the 3D effect is not
displayed correctly.
3D Viewing Notice On, Off Turns the notice that appears when viewing 3D
content on or off.
Aspect
*1
Auto
*2
, Normal, Full, Zoom, Anamorphic
Wide
*3
, Horiz. Squeeze
*3
Selects the aspect mode.
s
p.34
Overscan
*1
Auto, Off, 4%, and 8% Changes the output image ratio (the range of the
projected image).
•
Off , 4% , 8% : Sets the range of the image. When
set to Off , the entire range of the image is pro-
jected. Depending on the image signal, you may
notice noise at the top and bottom of the image.
•
Auto : Automatically sets to Off or 8% depend-
ing on the input signal.
Color Space Auto, BT.709, BT.2020 Sets the conversion system for the color space.
Dynamic
Range Dynamic Range Auto, SDR, HDR10,
HLG Lets you change the range of dark and bright
areas in images.
Signal Status - Displays the image signal.
HDR10 Setting 1 to 16 Lets you change the PQ curve of the dynamic
range in the HDR PQ method.
HLG Setting 1 to 16 Lets you change the HLG curve of the dynamic
range in the HDR HLG method.