Useful Functions
46
Using the HDMI Link Function
HDMI Link Function
When an AV device that meets the HDMI CEC standards is connected to the projector's HDMI port, you can
perform linked operations such as linked power on and volume adjustment for the AV system from one
remote control.
c
•
As long as the AV device meets the HDMI CEC standards, you can use the HDMI link function even if
the AV system in-between does not meet the HDMI CEC standards.
•
Up to 3 multi-media players that meet the HDMI CEC standards can be connected at the same time.
Connection Example
Projector
Amplifier
Multi-media players and so on
HDMI Link Settings
When
HDMI Link
is set to
On
, you can perform the following
operations.
s
Settings
-
HDMI Link
-
HDMI Link
•
Input Change Link
Changes the input source of the projector to HDMI when
content is played back on the connected device.
•
Connected Devices Operations
Using the projector's remote control, you can perform op-
erations such as Play, Fast Forward, Rewind, Pause, Volume
Adjustment, and Audio Mute.
You can also select the following functions from the
HDMI
Link
screen.
Function
Explanation
Audio Out Device
Selects which device outputs audio.
Projector
: Select this to output audio from the projector’s built-in speakers or from an
external speaker connected to the Audio Out port.
AV System
: Select this to output audio from an AV amplifier that supports the HDMI
CEC standards.
Power On Link
When
Power On Link
is set, operations are linked as shown below.
•
When the projector is turned on, the connected devices are also turned on.
•
Also, when the connected devices are turned on and content is played back, the projector
turns on.
