Configuration Menu
96
Network menu
When you have made network settings for the projector and you connect to a computer or smart device on
the network, you can change settings from your Web browser without displaying the Configuration menu,
or you can use the computer or smart device as a remote control.
Also, when mail notification settings have been made and an error or warning occurs in the projector, a
notification email is sent to the email addresses you have specified.
Function
Explanation
Net. Info. - Wired LAN
Displays the following network setting status information.
•
Projector Name
•
DHCP
•
IP Address
•
Subnet Mask
•
Gateway Address
•
MAC Address
Network Configuration
The following menus are available for setting Network items.
•
Basic
s
•
Wired LAN
s
•
s
•
Others
s
•
Reset
s
Network menu operations
Selecting from the top menu and sub menus, and changing selected items is the same as making operations
from the Configuration menu. When done, make sure you go to the
Setup complete
menu, and select
Yes
,
No
, or
Cancel
. When you select
Yes
or
No
, you are returned to the Configuration menu.
Yes
: Saves the settings and exits the
Network
menu.
No
: Does not save the settings and exits the
Network
menu.
Cancel
: Allows you to continue making settings without exiting the
Network
menu.
Basic menu
Function
Explanation
Projector Name
The name used to identify this projector on a network.
When editing, you can enter up to 16 single-byte alphanumeric characters. (" *
+ , / ; < = > ? [ ¥ ] ` | cannot be used.)
PJLink Password
Set a password to use when you access the projector using compatible PJLink
software. You can enter up to 32 single-byte alphanumeric characters. (Symbols
cannot be used.)