79
Cleaning the Air Filter and Vents
Replacing the Air Filter
Parent topic:
Maintaining and Transporting the Projector
Cleaning the Air Filter and Vents
Clean the projector's air filter and vents if they get dusty, or if you see a message telling you to clean
them.
1.
Turn off the projector and unplug the power cord.
2.
Gently remove the dust using a small vacuum designed for computers or a very soft brush (such as
a paintbrush).
Note:
You can remove the air filter to clean both sides. Do not use water or any other solvent to
clean the air filter.
Caution:
Do not use canned air. The gases may leave a flammable residue or push dust and debris
into the projector's optics or other sensitive areas.
Parent topic:
Air Filter and Vent Maintenance
Related tasks
Summary of Contents for EF-100 Series
