64
4.
Do one of the following:
• To lock the projector's power button, select
Child Lock
and select
On
. You must turn the projector
off and then on again to enable the setting.
Note:
To turn the projector on when this setting is enabled, you must press and hold the power
button for about 3 seconds.
• To lock all the projector's buttons, select
Control Panel Lock
>
Full Lock
. Select
Yes
at the
confirmation screen.
• To lock all the projector's buttons except the power button, select
Control Panel Lock
>
Partial
Lock
. Select
Yes
at the confirmation screen.
5.
Press the
menu button to exit the menu or the
return button to return to the previous screen.
Unlocking the Projector's Buttons
Parent topic:
Unlocking the Projector's Buttons
If the projector's buttons have been locked, do one of the following:
• To disable the child lock setting, press the
menu button on the projector remote control and select
Settings
>
Operation
>
Child Lock
>
Off
. You must turn the projector off and then on again to
disable the setting.
• To release the control panel lock, press and hold the
volume down button on the control panel for
about 7 seconds. A message appears and the lock is released.
Parent topic:
Summary of Contents for EF-100 Series
