3.
Select
Fax
on the printer's control panel.
To select an item, use the
u
d
l
r
buttons, and then press the OK button.
4.
Pick up the handset.
If a message to start sending or receiving faxes is displayed as shown on the following screen, the connection
has been established.
Related Information
&
“Making the Printer Ready to Send and Receive Faxes” on page 76
&
“Making Settings to Use an Answering Machine” on page 79
&
“Making Settings to Receive Faxes Operating Only a Connected Phone (Remote Receive)” on page 79
&
Making the Printer Ready to Send and Receive Faxes
Fax Setting Wizard
configures the basic fax features to make the printer ready to send and receive faxes.
The Wizard is displayed automatically when the printer is turned on for the first time. You can also display the
wizard manually from the printer's control panel. You need to run the wizard again in case the wizard is skipped
when the printer is first turned on or when the connection environment has changed.
❏
The items below are what you can set through the wizard.
❏
Header
(
Your Phone Number
and
Fax Header
)
❏
Receive Mode
(
Auto
or
Manual
)
❏
DRD Setting
❏
The items below are set automatically according to the connection environment.
❏
Dial Mode
(such as
Tone
or
Pulse
)
Fax Setting Wizard
may not configure
Dial Mode
automatically when
Line Type
is set to
PBX
. Configure
Dial Mode
manually.
❏
Other items in
Basic Settings
remain as they are.
Related Information
&
“Basic Settings Menu” on page 217
>
>
Making the Printer Ready to Send and Receive Faxes
76