![Epson EcoTank ET-2840 User Manual Download Page 179](http://html.mh-extra.com/html/epson/ecotank-et-2840/ecotank-et-2840_user-manual_2419004179.webp)
Cannot Select Paper Type or Paper Source in Printer Driver
A genuine Epson printer driver has not been installed.
Solutions
If a genuine Epson printer driver (EPSON XXXXX) has not been installed, the available functions are
limited. We recommend using a genuine Epson printer driver.
An Error Code is Displayed on the LCD Screen
A code is displayed on the LCD screen if there is an error or information that requires your attention. If a code is
displayed, follow the solutions below to solve the problem.
Code
Situation
Solutions
E-01
A printer error has occurred.
Open the inner cover and the scanner unit, and then remove any
paper or protective material inside the printer. Turn the power off and
on again.
E-02
A scanner error has occurred.
Turn the power off and on again.
E-12
A borderless printing ink pad needs
to be replaced.
Contact Epson or an authorised Epson service provider to replace the
borderless printing ink pad
*
. It is not a user-serviceable part.
Borderless printing is not available, but printing with a border is
available.
W-01
A paper jam has occurred.
Remove the paper from the printer and press the button displayed on
the bottom of the LCD screen to clear the error. In some cases, you
need to turn the power off and on again.
W-14
A borderless printing ink pad is
nearing the end of its service life.
Contact Epson or an authorised Epson service provider to replace the
borderless printing ink pad
*
. It is not a user-serviceable part. The
message will be displayed until the ink pad is replaced.
Press the
x
button to resume printing.
I-22
Set Wi-Fi from the
Push Button
(WPS)
.
Push the access point button. If there is no button on the access
point, open the access point setting window, and then click the
button displayed in the software.
I-23
Set Wi-Fi from the
PIN Code (WPS)
.
Enter the PIN code displayed on the LCD screen into the access point
or computer within two minutes.
I-31
Set Wi-Fi from the
Wi-Fi Auto
Connect
.
Install the software on your computer, and then press the OK button
when Wi-Fi setup starts.
I-41
Paper Setup Auto Display
is
disabled. Some functions cannot be
used.
If
Paper Setup Auto Display
is disabled, you cannot use AirPrint.
I-60
Your computer may not support
WSD (Web Services for Devices).
The scan to computer (WSD) feature is only available for computers
running English versions of Windows 10, Windows 8.1, Windows 8,
Windows 7 or Windows Vista. Make sure that the printer is correctly
connected to the computer.
>
An Error Code is Displayed on the LCD Screen
179