Epson EB-W70 User Manual Download

Page: 30 / 99

Projection Modes

Depending on how you positioned the projector, you may need to change the

projection mode so your images project correctly.
• Front (default setting) lets you project from a table in front of the screen.
• Front/Upside Down flips the image over top-to-bottom to project upside-

down from a ceiling or wall mount.

• Rear flips the image horizontally to project from behind a translucent

screen.

• Rear/Upside Down flips the image over top-to-bottom and horizontally to

project from a ceiling or wall mount and behind a translucent screen.

p.30

• "Projector Setup and Installation Options"

p.16

Changing the Projection Mode Using the Menus

You can change the projection mode to flip the image over top-to-bottom

and/or left-to-right using the projector menus.

Turn on the projector and display an image.

Press the

button on the remote control.

Select the Settings menu and press

Select Installation > Projection and press

Select a projection mode and press

Press

to exit the menus.

Summary of Contents for EB-W70




































































































Search results

Summary of Contents for EB-W70

Reviews:

Related manuals for EB-W70

Brands by name

Popular brands

Epson EB-W70, User Manual

Search results

Summary of Contents for EB-W70

Reviews:

Related manuals for EB-W70

Brands by name

Popular brands