Using Basic Projector Features
60
Execution Method
s
Settings
>
Geometry Correction
>
Curved Surface
Corner Wall
You can correct the corners and sides of an image projected on a curved
surface with right angles.
Execution Method
s
Settings
>
Geometry Correction
>
Corner Wall
Point Correction
This feature divides the projected image into a grid and corrects the distortion
in 0.5 pixel increments by moving the selected point of intersection from side
to side and up and down.
Execution Method
s
Settings
>
Geometry Correction
>
Point Correction
Adjusting the Image Quality
This section provides instructions to adjust the quality of your image.
g
g
Related Links
• "Gamma"
• "RGBCMY"
Focus/Distortion
You can correct the focus and the image distortion.
If you installed an optional short throw lens, correct the focus at the center of
your screen first, and then correct any distortion in the surrounding area.
When you focus on the center of your screen, the surrounding area may be
distorted and out of focus.
Execution Method
• Press the [Focus] button on the remote control until the focus adjustment
screen or the distortion adjustment screen is displayed..
• Press the [Lens] button on the control panel until the focus adjustment
screen or the distortion adjustment screen is displayed.
• Use the arrow buttons on the control panel or remote control to correct the
focus or the distortion.
Color Mode
The projector offers different color modes to provide optimum brightness,
contrast, and color for a variety of viewing environments and image types.
You can select the mode designed to match your image and environment, or
experiment with the available modes.
Execution Method
