Epson EB-L400U User Manual Download

Page: 198 / 225

Solving Projector or Remote Control Operation Problems

198

Check the solutions in these sections if you have problems operating the

projector or remote control.

p.198

• "Solutions to Problems with the Remote Control"

p.198

• "Solutions to Password Problems"

p.199

• "Solution When "The Battery that Saves Your Clock Settings is Running

Low" Message Appears"

p.199

Solutions to Projector Power or Shut-Off Problems

If the projector does not turn on when you press the power button or it turns

off unexpectedly, try the following solutions:
• Make sure the power cord is securely connected to the projector and to a

working electrical outlet.

• The projector's buttons may be locked for security. Unlock the buttons in

the

Control Panel Lock

setting in the projector's

Settings

menu or use the

remote control to turn on the projector.

Settings

Lock Setting

Control Panel Lock

• The power cord may be defective. Disconnect the cord and contact Epson

for help.

• If the projector's light source turns off unexpectedly, it may have entered

sleep mode after a period of inactivity. Perform any operation to wake the

projector. To turn off sleep mode, select

Off

as the

Sleep Mode

setting.

Extended

Operation

Sleep Mode

• If the projector's light source turns off unexpectedly, the A/V mute timer

may be enabled. To turn off the A/V mute timer, select

Off

as the

A/V

Mute Timer

setting.

Extended

Operation

A/V Mute Settings

A/V Mute Timer

• If the projector's light source turns off, the status indicator is flashing, and

the temp (temperature) indicator is lit, the projector has overheated and

turned off.

• If the power button on the remote control does not turn on the projector,

check its batteries and make sure at least one of the remote receivers are

available in the

Remote Receiver

setting in the projector's

Settings

menu.

• The cooling fans may run in standby status depending on the projector

settings. Also, when the projector wakes from standby status, the fans may

cause an unexpected noise. This is not a malfunction.

p.158

• "Projector Indicator Status"

p.189

• "Projector Feature Settings - Settings Menu"

p.155

• "Unlocking the Projector's Buttons"

p.102

Solutions to Problems with the Remote Control

If the projector does not respond to remote control commands, try the

following solutions:
• Check that the remote control batteries are installed correctly and have

power. If necessary, replace the batteries.

• Make sure you are operating the remote control within the reception angle

and range of the projector.

• Make sure the projector is not warming up or shutting down.
• Check to see if a button on the remote control is stuck down, causing it to

enter sleep mode. Release the button to wake the remote control up.

• Strong fluorescent lighting, direct sunlight, or infrared device signals may be

interfering with the projector's remote receivers. Dim the lights or move the

projector away from the sun or interfering equipment.

• Make sure at least one of the remote receivers are available in the

Remote

Receiver

setting in the projector's

Settings

menu.

• If the

Remote Receiver

setting is disabled, hold down the [Menu] button on

the remote control for at least 15 seconds to reset the setting to its default.

• If you assigned an ID number to the projector to operate multiple projectors

from the remote control, you may need to check or change the ID setting.

Summary of Contents for EB-L400U


































































































































































































































Search results

Summary of Contents for EB-L400U

Reviews:

Related manuals for EB-L400U

Brands by name

Popular brands

Epson EB-L400U, User Manual

Search results

Summary of Contents for EB-L400U

Reviews:

Related manuals for EB-L400U

Brands by name

Popular brands