Epson EB-L400U User Manual Download

Page: 19 / 225

Projector Placement

Projector Setup and Installation Options

You can set up or install your projector in the following ways:
Front/Rear

Front Ceiling/Rear Ceiling

If you project from the ceiling or from the rear, select the correct

Projection

setting and, if necessary, turn on the

Inv Direction Button

setting and adjust

the

OSD Rotation

setting.

Related Links

• "Precautions on Installation"

p.19

• "Projection Modes"

p.41

Precautions on Installation

You can install the projector or mount it to the ceiling at any horizontal or

vertical angle. Note the following precautions when installing the projector.

Attention

• If the projector is installed at an angle, it should be installed by qualified

technicians using mounting hardware designed for use with this projector.

• Install the projector appropriately to prevent it from falling down.
• Use M4 screws (up to a depth of 9 mm) to fix the projector's ceiling mount

fixing points and the mounting hardware at four points.

Summary of Contents for EB-L400U


































































































































































































































Search results

Summary of Contents for EB-L400U

Reviews:

Related manuals for EB-L400U

Brands by name

Popular brands

Epson EB-L400U, User Manual

Search results

Summary of Contents for EB-L400U

Reviews:

Related manuals for EB-L400U

Brands by name

Popular brands