Projector Network Settings - Network Menu
165
Setting
Options
Description
Adjust Image
Quality
Adjusts the screen mirroring
speed/quality.
When you want to increase image
quality, select a small number. When you
want to increase processing speed, select
a large number.
Connection Mode
Selects the type of WPS (Wi-Fi Protected
Setup) when you connect to the network
wirelessly. Select
PIN
to improve the
connection security. If your mobile
device supports only the PBC
connection, select
PIN/PBC
.
Available when you have set
Operation
Mode
to
Basic
.
Extended
Available when you have set
Operation
Mode
to
Extended
.
Meeting Mode
Selects the type of meeting.
•
Interruptions OK
: lets you connect to
another mobile device during Screen
Mirroring projection.
•
No Interruptions
: lets you exclusively
connect to one device.
Channel
Selects the wireless channel used by
Screen Mirroring.
Display
Display PIN Code
Set to
On
to display the eight-digit PIN
code on the projected image when
projecting input sources other than
Screen Mirroring.
Display Device
Name
Set to
On
to display the newly connected
device name on the projected image
when projecting input sources other than
Screen Mirroring.
Reset
—
Resets all adjustment values on the
Screen Mirroring Settings
menu to their
default settings.
Network Menu - Basic Menu
Settings on the
Basic
menu let you select the basic network settings.
s
Network
>
Network Configuration
>
Basic
Setting
Options
Description
Projector Name
Up to 16
alphanumeric
characters
(do not use " * + ,
/ : ; < = > ? [ \ ] ` |
spaces)
Enter a name to identify the projector
over the network.
PJLink Password
Up to 32
alphanumeric
characters
Enter a password for using the PJLink
protocol for projector control.
Remote Password
Up to 8
alphanumeric
characters
(do not use * :
spaces)
Enter a password for accessing the
projector using the Basic Control. (User
name is
EPSONREMOTE
; default
password is
guest
.)
Summary of Contents for EB-L400U
Page 1: ...User s Guide ...
