Setting Up Projector Network E-Mail Alerts
135
You can set up the projector to send you an e-mail alert over the network if
there is a problem with the projector.
If you set the
Standby Mode
setting to
Communication On
, you can receive
the e-mail alerts even if the projector is in standby mode (when the power is
off).
s
Extended
>
Standby Mode
>
Standby Mode
a
Press the [Menu] button, select the
Network
menu, and press [Enter].
b
Select
Network Configuration
and press [Enter].
c
Select the
Notifications
menu and press [Enter].
d
Set the
Mail Notification
setting to
On
.
e
Enter the IP address for the
SMTP Server
option.
a
Do not use these addresses: 127.x.x.x or 224.0.0.0 through
255.255.255.255 (where x is a number from 0 to 255).
f
Select a number for the SMTP server
Port Number
, from 0 to 65535
(default is 25).
g
Enter the e-mail address to be indicated as the sender in
From
.
h
Choose an address field, enter the e-mail address, and select the alerts
you want to receive. Repeat for up to three addresses.
a
Your e-mail address can be up to 32 alphanumeric characters
long.
i
When you finish selecting settings, select
Complete
and follow the on-
screen instructions to save your settings and exit the menus.
a
If a critical problem causes a projector to shut down, you may not
receive an e-mail alert.
g
g
Related Links
• "Network Projector E-mail Alert Messages"
• "Projector Setup Settings - Extended Menu"
Network Projector E-mail Alert Messages
When a problem occurs with a projector on the network, and you selected to
receive e-mail alerts, you receive an e-mail containing the following
information:
• The email address set in
From
as the mail sender
•
Epson Projector
in the subject line
• The name of the projector experiencing a problem
• The IP address of the affected projector
• Detailed information about the problem
Summary of Contents for EB-L400U
Page 1: ...User s Guide ...
