Epson EB-L30000U, User Manual

Page: 210 / 283

Check Remedy
Is the remote control button lock set? When the remote control button lock is set, buttons except for those needed for basic remote control operations are
deactivated. Hold down the [ ] button to cancel the remote control button lock.
s
"Remote control button lock" p.118
Cannot control correctly using Art-Net
Check Remedy
While controlling the projector using Art-Net, did you operate
the projector using the remote control or control panel? While controlling the projector using Art-Net and performing operations from the remote control or control
panel, settings made by the DMX controller or application software may not be applied to the projector
correctly. When you want to apply all the channel controls to the projector, set Channel 13 to "Cannot
control", then set it back to "Can control".
s
"About Art-Net" p.246
Nothing appears on the external monitor
Check Remedy
Is the external monitor connected to the correct port? The port to which the external monitor should be connected varies depending on the port to which the image
you want to display is being input.

When inputting an image signal to the Computer port or the BNC port, connect to the Monitor Out
port.

When inputting an image signal to the 3G/HD/SD SDI port, connect to the Monitor Out SDI port.
Are you projecting a split screen? Only RGB signals projected on the left screen from the Computer port or the BNC port can be displayed on an
external monitor.
s
"Projecting Two Images Simultaneously (Split Screen)" p.103
Is the projector in standby status? Check that A/V Output and Monitor Out from the Configuration menu are set correctly.
s
Extended - A/V Settings p.147
Problem Solving
210