Solving Image or Sound Problems
209
Solutions When Image is Incorrect Using the USB
Display Function
If no image appears or if the image appears incorrectly using the USB Display
function, try the following solutions:
• Press the [USB] button on the remote control.
• Disconnect the USB cable, and reconnect it.
• Make sure the Epson USB Display software has been installed correctly.
Depending on your OS or computer settings, the software may not have
been installed automatically. Download the latest software from the
following Web site and install it.
• For Mac, select the
USB Display
icon in the
Dock
folder. If the icon does
not appear on the
Dock
, double-click
USB Display
in the
Applications
folder.
If you select
Exit
from the
USB Display
icon menu on the
Dock
, USB
Display does not start automatically when you connect the USB cable.
• If the mouse cursor flickers, select
Make the movement of the mouse
pointer smooth
in the
Epson USB Display Settings
program on your
computer.
• Turn off the
Transfer layered window
setting in the
Epson USB Display
Settings
program on your computer.
• If you change the computer resolution during projection, the performance
and quality of the video may decline.
• For images projected with Windows Media Center, reduce the screen size
from full screen mode.
• For images projected from applications using Windows DirectX, turn off
DirectX functions.
g
g
Related Links
• "Connecting to a Computer for USB Video and Audio"
Solutions When "No Signal" Message Appears
If the "No Signal" message appears, try the following solutions:
• Press the [Source Search] button and wait a few seconds for an image to
appear.
• Turn on the connected computer or video source, and press play to begin
your presentation, if necessary.
• Check that all cables required for projection are securely connected.
• If you are projecting from a laptop computer, make sure it is set up to
display on an external monitor.
• If necessary, turn off the projector and the connected computer or video
source, and then turn them back on.
• If you are projecting from an HDMI source, replace the HDMI cable with
the shorter one.
g
g
Related Links
• "Displaying From a Windows Laptop"
• "Displaying From a Mac Laptop"
Displaying From a Windows Laptop
If the message "No Signal" is displayed when projecting from a laptop, you
need to set up the Windows laptop to display on an external monitor.
a
Hold down the Windows key and press
P
on your keyboard at the same
time, then click
Duplicate
.
b
If the same image is not displayed by the laptop and projector, check
the Windows
Display
utility to make sure the external monitor port is
enabled and extended desktop mode is disabled.
c
If necessary, check your video card settings and set the multiple display
option to
Mirror
or
Duplicate
.
Summary of Contents for EB-L200F
Page 1: ...User s Guide ...