Epson EB-L200F User Manual Download

Page: 194 / 247

Copying Menu Settings Between Projectors (Batch Setup)

194

The computer recognizes the projector as a removable disk.

Copy the batch setup file (PJCONFDATA.bin) that you saved to your

computer to the top level folder of the removable disk.

Do not copy any files or folders other than the batch setup file to

the removable disk.

Eject the USB device (Windows) or drag the removable disk icon to the

Trash (Mac).

Disconnect the USB cable.
When all of the indicators start flashing, the settings are being written.

When writing is finished, the projector turns off.

Caution

Do not disconnect the power cord from the projector while the file is being

written. If the power cord is disconnected, the projector may not start

correctly.

Related Links

• "Batch Setup Error Notification"

p.194

Batch Setup Error Notification

The projector's indicators notify you if an error occurs during a batch setup

operation. Check the status of the projector's indicators and follow the

instructions described in the table here.

Indicator status

Problem and solutions

• Laser: Orange - flashing

fast

• Temp: Orange - flashing

fast

The batch setup file may be corrupt, or the USB flash

drive may not be connected correctly.
Disconnect the USB flash drive, unplug and then plug

in the projector's power cord, and then try again.

Indicator status

Problem and solutions

• Power: Blue - flashing

fast

• Status: Blue - flashing

fast

• Laser: Orange - flashing

fast

• Temp: Orange - flashing

fast

Writing the settings may have failed and an error may

have occurred in the projector's firmware.
Stop using the projector, remove the power plug from

the electrical outlet. Contact Epson for help.

Summary of Contents for EB-L200F
























































































































































































































































Search results

Summary of Contents for EB-L200F

Reviews:

Related manuals for EB-L200F

Brands by name

Popular brands

Epson EB-L200F, User Manual

Search results

Summary of Contents for EB-L200F

Reviews:

Related manuals for EB-L200F

Brands by name

Popular brands