Epson EB-L1050U, User Manual

Page: 91 / 291

a
Before performing tiling, adjust the projected image so that it is a
rectangle. Also, adjust the size and focus of the images.
s
"Adjusting the Image Size" p.37
s
"Correcting the Focus" p.38
a
Press the [Menu] button while projecting.
b
Select Multi-Projection from Extended , and then press the [ ]
button.
c
Select Tiling , and then press the [ ] button.
d
Select Layout , and then press the [ ] button.
(1) Set the number of projectors in Row and Column .
(2)
Select Settings , and then press the [ ] button.
e
Repeat steps 1 to 4 for each projector to be used for tiling.
f
Select Location Setup , and then press the [ ] button.
(1) Set the positions of the projected images in Row Order and Column
Order
.
Row Order
: Place screens from top to bottom in the order of
1
,
2
,
3
.
Column Order
: Place screens from left to right in the order of
A
,
B
,
C
.
(2)
Select Settings , and then press the [ ] button.
g
Repeat step 6 for each projector.
h
Input the image signal to display the image.
s
"Automatically Detecting Input Signals and Changing the
Projected Image (Source Search)" p.61
When tiling is complete, adjust any positional gaps and the tint of the
projected images.
s
"Adjusting the projected images" p.90
Edge Blending
You can fine tune the overlapping areas to make seamless screen.
Multi-Projection Function
91