Epson EB-735F Installation Manual Download Page 76

Page: 76 / 85

Setting the Projector

Perform "Remove USB device" on your computer, and then disconnect the USB cable

When using a Mac, perform "Remove EPSON_PJ".

The projector turns off, and only the On/Standby indicator is lit blue.

Copying saved settings to other projectors

Disconnect the power cord from the projector, and check that all of the projector's
indicators have turned off

Connect the computer's USB port to the projector's USB-B1 port with a USB cable

While holding down the [Menu] button on the remote control or the control panel, connect
the power cord to the projector

The On/Standby indicator and the Status indicator turn blue, and the Laser indicator and the Temp
indicator turn orange.

When all of the projector's indicators turn on, release the [Menu] button.

The projector is recognized as a removable disk by the computer.

Copy the batch setup file (PJCONFDATA.bin) that you saved to your computer to the top-
level folder of the removable disk

Do not copy any files or folders other than the batch setup file to the removable disk.

Summary of Contents for EB-735F






















































































Search results

Summary of Contents for EB-735F

Reviews:

Brands by name

Popular brands

Epson EB-735F, Installation Manual

Search results

Summary of Contents for EB-735F

Reviews:

Brands by name

Popular brands