Epson EB-1830 User Manual Download

Page: 87 / 159

Problems relating to images

No images appear

Check

Remedy

Did you press the [

] button?

Press the [

] button to turn the power on.

Are the indicators switched off?

The power cable is not connected correctly or power is not being supplied normally.
Connect the projector's power cable correctly.

Quick Start Guide

Check that your electrical outlet or power source is functioning correctly.

Is A/V Mute active?

Press the [A/V Mute] button on the Remote Control to cancel A/V Mute.

p.32

Is the A/V mute slide closed?

Open the A/V mute slide.

p.10

Are the Configuration Menu settings correct?

Reset all of the settings.

Reset

Menu -

Reset All

p.80

Is the projected image completely black?

Only when projecting computer images

Some input images, such as screen savers, may be completely black.

Is the image signal format setting correct?

Only when projecting images from a video source

Change the setting according to the signal for the connected equipment.

Signal

Menu -

Video Signal

p.54

Moving images are not displayed (only the moving image portion turns black)

Check

Remedy

Is the computer's image signal being output to the LCD and the
monitor?

Only when projecting images from a laptop computer or a computer

with a built-in LCD screen

Change the image signal from the computer to external output only.

Check your computer's documentation.

Projection stops automatically

Check

Remedy

Sleep Mode

set to

Press the [

] button to turn the power on. If you do not want to use Sleep Mode, change the setting to

Off

Extended

Menu -

Operation

Sleep Mode

p.58

Problem Solving

Summary of Contents for EB-1830
































































































































































Search results

Summary of Contents for EB-1830

Reviews:

Related manuals for EB-1830

Brands by name

Popular brands

Epson EB-1830, User Manual

Search results

Summary of Contents for EB-1830

Reviews:

Related manuals for EB-1830

Brands by name

Popular brands