Epson EB-1750, User Manual, Page: 49 / 149

Projecting image files in a folder in sequence (Slideshow)
You can project the image files in a folder in sequence, one at a time. This
function is called Slideshow. Use the following procedure to run
Slideshow.
a
To change files automatically when you run Slideshow, set Screen
Switching Time from Option in Slideshow to anything other than No .
The default setting is 3 seconds.
a
Start Slideshow.
The file list screen is displayed.
s
"Starting Slideshow" p.46
b
Use the [ ][ ][ ][ ] buttons to position the cursor
over the folder for the Slideshow that you want to run and press
the [Enter] button.
c
Select Slideshow at the bottom right of the file list screen, and
then press the [Enter] button.
Slideshow starts, and the image files in the folder are automatically
projected in sequence, one at a time.
When the last file is projected, the file list is displayed again
automatically. If you set
Continuous Play to On in the Option
window, projection starts again from the beginning again when it
reaches the end.
s
"Image file display settings and Slideshow operation settings"
p.50
You can proceed to the next screen, return to the previous screen, or
stop playback while projecting a Slideshow.
a
If Screen Switching Time on the Option screen is set to No , files do
not change automatically when you select Play Slideshow. Press the
[ ] button, the [Enter] button, or the [Down] button on the remote
control to continue to the next file.
Playing a scenario
a
Start Slideshow.
The file list screen is displayed.
s
"Starting Slideshow" p.46
b
Press the [ ], [ ], [ ], and [ ] buttons to select the
scenario you want to playback.
c
Press the [Enter] button.
Playback starts.
Operating procedures during scenario playback
Screen switching
For FSE files
Projection Functions
49