Installing the Touch Unit
73
Notes on the Laser
Attached labels
The Touch Unit is a Class 1 laser product that conforms to the IEC/EN60825-1:2014 standard.
The Touch Unit is a Class 1 laser product that conforms to the IEC/EN60825-1:2007 standard. (For North/South
America.)
There are warning labels affixed to the Touch Unit to indicate that it is a Class 1 laser product.
For American Users
The labels contain the following information.
Class 1 laser product
Warning: Do not open the case. The device contains a high power laser product.
Warning:
Caution: If this section is opened, class 3B invisible laser radiation will be emitted.
Avoid exposure to the radiation beams.
Laser diffusion port
The laser beam is diffused from the laser diffusion ports at the back of the Touch Unit.
Light source output: Max. 285 W
