Epson EB-118, User Manual

Page: 46 / 210

Projection Modes
46
Depending on how you positioned the projector, you may need to change the
projection mode so your images project correctly.
• Front lets you project from a table in front of the screen.
• Front/Ceiling flips the image over top-to-bottom to project upside-down
from a ceiling or wall mount.
• Rear flips the image horizontally to project from behind a translucent
screen.
• Rear/Ceiling flips the image over top-to-bottom and horizontally to project
from a ceiling or wall mount and behind a translucent screen.
g g
Related Links
• "Changing the Projection Mode Using the Remote Control" p.46
• "Changing the Projection Mode Using the Menus" p.46
• "Projector Setup and Installation Options" p.25
Changing the Projection Mode Using the Remote
Control
You can change the projection mode to flip the image over top-to-bottom.
a
Turn on the projector and display an image.
b Hold down the [A/V Mute] button on the remote control for 5 seconds.
The image disappears briefly and reappears flipped top-to-bottom.
c To change projection back to the original mode, hold down the [A/V
Mute] button for 5 seconds again.
Changing the Projection Mode Using the Menus
You can change the projection mode to flip the image over top-to-bottom
and/or left-to-right using the projector menus.
a Turn on the projector and display an image.
b Press the [Menu] button on the control panel or remote control.
c Select the Extended menu and press [Enter].
d
Select Projection and press [Enter].