14
Installing the EasyMP Software Into the Computer
• EasyMP Software CD-ROM (included)
• Computer that can run EasyMP (See following page)
The following software programs are included on the EasyMP software CD-ROM.
• EMP NS Connection
This program is used to send images from a computer to a projector via the
network when using Network Screen.
s
"
Connecting the Computer and Projector via the Network
• EMP SlideMaker2
This program is used to convert PowerPoint files into a format that can be
played directly by the projector. It does this by creating files called "scenarios".
EMP SlideMaker2 lets you extract the required parts of a PowerPoint file into
the scenario and change the order of these parts without changing the original
PowerPoint file in any way, and it also lets you embed other image files and
movie files into the scenario. You can transfer a scenario onto a memory card or
USB storage device, and insert it into (or connect it to) the projector, so that
you can give presentations without having to connect a computer to the
projector.
s
"Preparing a Presentation (Using EMP SlideMaker2)" in the
EasyMP
Operation Guide
• EMP Monitor
This program is used to display the statuses of multiple projectors that are
connected to the network on a computer screen, so that you can monitor the
projectors and carry out control operations such as turning the power for all the
projectors on or off at once. This allows all of the projectors to be monitored
and controlled by a single operator at a computer.
s
EMP Monitor Operation Guide
The specifications differ as follows for the computers that are required to run each
of the above programs.
Things to Prepare
Installation Components
Summary of Contents for EasyMP EMP-755
