Troubleshooting
93
f
E-mail is not sent even if an abnormality occurs in the projector
Check
Remedy
Is the wireless LAN unit connected?
Check that the wireless LAN unit is securely connected.
Is the network connect setting correct?
Check the projector's network settings.
"Network Menu (EMP-1825 Only)"
Is "Standby Mode" set to "Network On"?
To use the Mail Notification function when the projector is in standby, set "Network On" in "Standby Mode"
from the configuration menu.
Did a fatal abnormality occur and the projector come
to a sudden stop?
When the projector comes to a sudden stop, e-mai cannot be sent.
If, after checking the projector, the abnormal state continues, contact your local dealer or the nearest address
provided in the
Support and Service Guide.
s
Is power being supplied to the projector?
Check that your electrical outlet or power source is functioning correctly.
Is the network cable connected correctly?
Check that the network cable is connected correctly. Reconnect it if it is not connected or not connected
properly.
For Wireless LAN
For Wired LAN