Epson E8-992F User Manual Download Page 155

Page: 155 / 210

Copying Menu Settings Between Projectors (Batch Setup)

155

Connect the USB cable to the computer's USB port and to the

projector's USB-B port.

Hold down the [Menu] button on the remote control or the control

panel and connect the power cord to the projector.

When all of the projector's indicators turn on, release the [Menu]

button.
The computer recognizes the projector as a removable disk.

Copy the batch setup file (PJCONFDATA.bin) that you saved to your

computer to the top level folder of the removable disk.

Do not copy any files or folders other than the batch setup file to

the removable disk.

Eject the USB device (Windows) or drag the removable disk icon to the

Trash (Mac).

Disconnect the USB cable.
When all of the indicators start flashing, the settings are being written.

When writing is finished, the projector turns off.

Caution

Do not disconnect the power cord from the projector while the file is being

written. If the power cord is disconnected, the projector may not start

correctly.

Related Links

• "Batch Setup Error Notification"

p.155

Batch Setup Error Notification

The projector's indicators notify you if an error occurs during a batch setup

operation. Check the status of the projector's indicators and follow the

instructions described in the table here.

Indicator status

Problem and solutions

• Lamp: Orange - flashing

fast

• Temp: Orange - flashing

fast

The batch setup file may be corrupt, or the USB flash

drive or USB cable may not be connected correctly.
Disconnect the USB flash drive or the USB cable,

unplug and then plug in the projector's power cord, and

then try again.

• Power: Blue - flashing

fast

• Status: Blue - flashing

fast

• Lamp: Orange - flashing

fast

• Temp: Orange - flashing

fast

Writing the settings may have failed and an error may

have occurred in the projector's firmware.
Stop using the projector, remove the power plug from

the electrical outlet. Contact Epson for help.

Related Links

• "Projector Indicator Status"

p.169

Summary of Contents for E8-992F



















































































































































































































Search results

Summary of Contents for E8-992F

Reviews:

Related manuals for E8-992F

Brands by name

Popular brands

Epson E8-992F, User Manual

Search results

Summary of Contents for E8-992F

Reviews:

Related manuals for E8-992F

Brands by name

Popular brands