Epson DS-730 User Manual Download

Page: 181 / 263

Lift the left side of the separation roller, and then slide and remove the installed separation rollers.

10. Insert the new separation roller axis into the hole on the right side, and then lower the roller.

11. Close the separation roller cover.

Important:

If the cover is hard to close, make sure the separation rollers are installed correctly.

12. Close the scanner cover.

13. Plug in the AC adapter, and then turn on the scanner.

14. Reset the scan number on the control panel.

Note:

Dispose of the pickup roller and the separation roller following the rules and regulations of your local authority. Do not
disassemble them.

Related Information

“Roller Assembly Kit Codes” on page 26

Resetting the Number of Scans

Reset the number of scans after replacing the roller assembly kit.

Maintenance

Resetting the Number of Scans

181

Summary of Contents for DS-730








































































































































































































































































Search results

Summary of Contents for DS-730

Reviews:

Related manuals for DS-730

Brands by name

Popular brands

Epson DS-730, User Manual

Search results

Summary of Contents for DS-730

Reviews:

Related manuals for DS-730

Brands by name

Popular brands