Scanned Image Problems
Straight Lines Appear when Scanning from ADF
❏
Clean the ADF.
Straight lines may appear in the image when trash or dirt gets into the ADF.
❏
Remove any trash or dirt that adheres to the original.
❏
Using
Detect Glass Dirt
feature, alert message appears when dirt is detected on the scanner glass.
Select
Scanner Setting
tab and then select
On-High
or
On-Low
from
Detect Glass Dirt
in Epson Scan 2
Utility .
When an alert is displayed, clean the glass surfaces inside your scanner using a genuine Epson cleaning kit or a
soft cloth.
Note:
❏
Depending on the dirt, it may not be detected correctly.
❏
If the detection does not work correctly, change the setting.
Select
On-High
if the dirt is not detected. Select
On-Low
or
Off
if the alert is displayed by a misdetection.
Related Information
&
“Cleaning Inside the Scanner” on page 148
Glass Dirt Alert Does Not Disappear
If the glass dirt alert screen appears after cleaning the inside of the scanner, check the glass surface again. If there
are scratches on the glass, they will be detected as a glass dirt.
Glass part will be required to replace. Contact your local dealer to repair.
Colors Are Uneven in the Scanned Image
>
>
Colors Are Uneven in the Scanned Image
169
Summary of Contents for DS-530 II
Page 10: ...Important Instructions Safety Instructions 11 Restrictions on Copying 12 ...
Page 61: ...Basic Scanning Scanning Using a Scanner Button 62 Scanning from a Computer 62 ...
Page 135: ...Using the Flatbed Scanner Dock About the Flatbed Scanner Dock 136 ...
Page 184: ...Where to Get Help Technical Support Web Site 185 Contacting Epson Support 185 ...
