Epson DS-530 II User Manual Download Page 166

Page: 166 / 191

If multiple originals are fed frequently, try the following.

❏

If you load unsupported originals, the scanner may feed multiple originals at a time.

❏

Clean the rollers inside the scanner.

❏

Reduce the number of originals being placed at a time.

❏

Press the

button to slow down the scanning speed.

❏

Use

Automatic Feeding Mode

, and scan originals one by one.

When you are using Document Capture Pro, you can open the Epson Scan 2 window by pressing the

Detailed

Settings

button on the

Scan Settings

screen.

Related Information

“Removing Jammed Originals from the Scanner” on page 166

“Scanning Different Sizes or Types of Originals One by One (Automatic Feeding Mode)” on page 90

“Cleaning Inside the Scanner” on page 148

Removing Jammed Originals from the Scanner

If an original has jammed inside the scanner, follow these steps to remove it.

Remove all originals remaining in the input tray.

Pull the lever and open the scanner cover.

Solving Problems

Paper Feeding Problems

Removing Jammed Originals from the Scanner

166

Summary of Contents for DS-530 II
































































































































































































Search results

Summary of Contents for DS-530 II

Reviews:

Epson DS-530 II, User Manual, Page: 166 / 191

Search results

Summary of Contents for DS-530 II

Reviews: