33
Configuration Menu Functions
Configuration Men
u
"Memory" menu
Sets the signal format in accordance with the video equipment that is connected to the [Video] or [S-
Video] input port. If set to "Auto", the video signal format is set automatically.
If there is a lot of interference in the image, or if a problem such as no image being projected occurs even
though "Auto" has been selected, select the correct signal format manually.
Change this setting depending on the type of signal that is being output from the video equipment that is
connected to the [InputA] port.
If "Auto" is selected, appropriate signal is automatically set. If colours appear unnatural even though
"Auto" is selected, select appropriate signal name in the menu.
This sets the signal format in accordance with the signals being output from video equipment that is
connected to the [SCART] port (in Europe) or [D4] port (in Japan).
This should be set in accordance with the method used to set up the projector.
• Front
: Select when the projector is set up in front of the screen.
• Front/Ceiling : Select when the projector is set up in front of the screen and suspended from a ceiling.
• Rear
: Select when the projector is set up behind the screen.
• Rear/Ceiling : Select when the projector is set up behind the screen and suspended from a ceiling.
This sets the display language for messages and menus.
Adjustment values for the "Settings" menu functions are returned to their default settings, except for the
"High Altitude Mode", "Input A", "D4/SCART", "Projection", and "Language".
This can be used to save "Picture" menu and the "Image" menu settings.
This retrieves settings previously saved using "Save Memory"
This resets (erases) all settings that have been made using the "Save Memory".
Input Signal
Video Signal
InputA
D4/SCART
Projection
Language
Reset
Save Memory
Load Memory
Reset Memory
Summary of Contents for dreamio EMP-TW620
Page 1: ......
Page 58: ......
Page 60: ...Printed on 100 recycled paper E Printed in China 410702900 05 XX XA G04 ...
