Chapter 3
Paper Handling
Selecting a Paper Source
Your printer can print on a wide variety of paper types, including single sheets, continuous paper,
multipart forms, labels, envelopes, postcards, and continuous forms with labels.
!
Caution:
Do not use paper that is folded (except envelope flaps), creased, curled, torn, stained, or stamped.
Always use new, clean paper that meets the paper specifications. See “Paper” on page 126 for more
detailed information.
Your printer can accommodate various paper types through four paper sources: sheet guide, tractor,
optional cut sheet feeder, or optional automatic sheet alignment unit. You should select the paper
source depending on the type of paper you are using. You can select the paper source by pressing the
Paper Source
button on the control panel. See “Buttons and Lights” on page 17 for more
information. You can also select the paper source from the printer driver.
Depending on the paper source, the printer prints on the paper and then ejects it differently as shown
below.
Paper source: Tractor
DLQ-3500II/DLQ-3500IIN User’s Guide
Paper Handling
33
