Epson DLQ-3500II User Manual Download Page 126

Page: 126 / 147

Power consumption (with
USB connection)

100 to 120 V:

Approx. 80 W (ISO/IEC 10561 Letter pattern)

DLQ-3500II:
Approx. 0.6 W in sleep mode*

DLQ-3500IIN:
Approx. 0.9 W in sleep mode*

220 to 240 V:

Approx. 78 W (ISO/IEC 10561 Letter pattern)

DLQ-3500II:
Approx. 0.8 W in sleep mode*

DLQ-3500IIN:
Approx. 1.0 W in sleep mode*

* When the configured time passes in the following condition, the printer enters sleep mode.

- not error.
- There is no data in input buffer.

Note:

Check the label on the back of the printer for the voltage of your printer.

Environmental

Temperature

Humidity
(without condensation)

Operation (plain paper)

5 to 35 ˚C (41 to 95 ˚F)

10 to 80 % RH

Operation (recycled
paper, envelope, label,
or roll paper)

15 to 25 ˚C (59 to 77 ˚F)

30 to 60 % RH

Storage

-30 to 60 ˚C (-22 to 140 ˚F)

0 to 85 %

Paper

Note:

❏

Use recycled paper, multipart paper, labels, envelopes, and postcards only under normal
temperature and humidity conditions described below.
Temperature: 15 to 25 ˚C (59 to 77 ˚F)
Humidity: 30 to 60 % RH

❏

Do not load paper that is curled, folded, or crumpled.

DLQ-3500II/DLQ-3500IIN User’s Guide

Product Information

126

Summary of Contents for DLQ-3500II




















































































































































Search results

Summary of Contents for DLQ-3500II

Reviews:

Related manuals for DLQ-3500II

Brands by name

Popular brands

Epson DLQ-3500II, User Manual

Search results

Summary of Contents for DLQ-3500II

Reviews:

Related manuals for DLQ-3500II

Brands by name

Popular brands