Multipart forms
The specifications for the dimensions of multipart forms are the same as those for single sheets and
continuous paper. See “Single sheets” on page 127 and “Continuous paper” on page 127 for detailed
information.
❏
The form sheets of continuous multipart forms should be securely joined together along the left
and right edges by crimping or, spot-gluing. For the best printing quality, use multipart forms
joined with spot-gluing.
spot-gluing
crimping
spot-gluing and crimping on
each side
1. 1 inch or less
2. 3 inches or less
3. printing side
4. 1 inch or less
5. 3 inches or less
!
Caution:
Never use continuous multipart forms that are joined with metal staples or bar-gluing.
1. bar-gluing
2. metal stapling
❏
The thickness of the folded part when extended should be 2 mm or less.
DLQ-3500II/DLQ-3500IIN User’s Guide
Product Information
130
