Cut Sheet Feeder
The optional cut sheet feeder C80683* gives you easier and more efficient handling of single sheet
paper, single sheet multipart forms, envelopes, and postcards. You can use the cut sheet feeder without
removing continuous paper.
You can load the following quantities of paper to the cut sheet feeder:
Single sheets
A3 size paper
Up to 130 sheets of 82 g/m² (22 lb) paper
Up to 170 sheets of 64 g/m² (17 lb) paper
Other paper
Up to 200 sheets of 82 g/m² (22 lb) paper
Up to 250 sheets of 64 g/m² (17 lb) paper
Single sheet multipart forms
Up to 40 sheets of 47 g/m² (12.5 lb) paper
Envelopes
Up to 20 plain or bond envelopes
Up to 30 airmail envelopes
Postcards
Up to 50 plain paper cards
Note:
❏
You cannot install the cut sheet feeder and optional automatic sheet alignment unit at the same
time.
❏
This option may not be available in some countries.
Installing the cut sheet feeder
Follow these steps to install the cut sheet feeder:
1. Make sure that the printer is turned off.
2. Assemble the cut sheet feeder by following the instructions provided in the documentation that
comes with the feeder.
3. Close the sprocket covers if they are open, and lock the sprockets by pushing down the lock levers if
necessary.
DLQ-3500II/DLQ-3500IIN User’s Guide
Options and Consumables
112
