Disassembly and Assembly
6.
Remove the E-ring on the left side
tension roller shaft and pull out the
shaft holder. Then remove the tension roller shaft by pulling it right.
Figure 3-42. Removing the Tension Roller Shaft
Removing the Platen
1.
Remove the paper bail assembly. (See page 3-34.)
2.
Remove the upper paper guide. (Refer to
Removing the Upper Paper Guide
and Top PE Sensor,
on page 3-36.)
3.
Using a 3 mm hex driver, remove the 4 hexagon screws securing the platen to
both holders. Then remove the platen with the lower paper guide.
3-38
EPSON
Service Manual
Summary of Contents for DFX-5000+
