background image

32

English

Appendix

Downloading Drivers, Utilities, and Manuals

Printer drivers, utilities, and manuals can be downloaded from one of the following URLs:

For customers in North America, go to the following web site:

 

http://www.epsonexpert.com/

For customers in other countries, go to the following web site:

 

https://download.epson-biz.com/?service=pos

Open Source Software License

This product uses open source software in addition to the software for which Epson is licensed. Information 
related to the open source software used for this product is available from the following URLs:

Open source software list: 

http://xxx.xxx.xxx.xxx/OSS/copy.html

Complete text of  license agreement: 

http://xxx.xxx.xxx.xxx/OSS/licenseterm.html

("xxx.xxx.xxx.xxx" represents the IP address of the printer.)

Restriction of Use

When this product is used for applications requiring high reliability/safety such as transportation devices 
related to aviation, rail, marine, automotive etc.; disaster prevention devices; various safety devices etc.; or 
functional/precision devices etc., you should use this product only after giving consideration to including 
fail-safes and redundancies into your design to maintain safety and total system reliability. Because this 
product was not intended for use in applications requiring extremely high reliability/safety such as 
aerospace equipment, main communication equipment, nuclear power control equipment, or medical 
equipment related to direct medical care etc., please make your own judgment on this product's suitability 
after a full evaluation.

Notes

(1) All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or 

transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, 
without the prior written permission of Seiko Epson Corporation.

(2) The contents of this manual are subject to change without notice.

(3) While every precaution has been taken in the preparation of this manual, Seiko Epson Corporation 

assumes no responsibility for errors or omissions.

(4) Neither is any liability assumed for damages resulting from the use of the information contained herein.

(5) Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third 

parties for damages, losses, costs, or expenses incurred by purchaser or third parties as a result of: 
accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this 
product, or (excluding the U.S.) failure to strictly comply with Seiko Epson Corporation’s operating and 
maintenance instructions.

(6) Seiko Epson Corporation shall not be liable for any damages or problems arising from the use of any 

options or any consumable products other than those designated as Original Epson Products or Epson 
Approved Products by Seiko Epson Corporation.

Summary of Contents for ColorWorks TM-C7500


































Reviews: