Epson ColorPage 8000, Printer Manual

Page: 57 / 121

3-14
3-14 | Configuring the Printer
Setting GL2 Emulation Options
The GL2 emulation allows you to use your printer with plotter applications.
Within this emulation, you can choose between two modes, LJ4GL2 and
GLlike.
GL2 menu settings
Setting Options Description
GL-Mode LJ4GL2 , GLlike Selects the HP LaserJet4
emulation of GL/2 or
EPSON GL/2.
Scale Off , A0, A1, A2, A3 Selects whether the output
is scaled, and whether the
scale factor is based on the
output paper size of the
application.
Origin Corner , Center Sets whether the origin of
the plotter-unit coordinate
system is at the lower-left
or the center of the page.
Pen Pen0 , Pen1, Pen2, Pen3 Pen4,
Pen5, Pen6
Selects the logical “pen.”
End Butt , Square, Triangular, Round Sets the line-ending style.
Join Mitered , Miteredbeveled,
Triangular, Round, Beveled, None
Sets the way lines are
joined.
Pen0 0.05 to 5.00 mm in steps of 0.05
mm; default is
0.35 mm
Sets the line width for each
“pen.”
Pen1
Pen2
Pen3
Pen4
Pen5
Pen6