10
Software Installation Guide
4. Turn the printer on.
5. Plug the AC adapter’s power cord into a grounded electrical
outlet. Then connect it to the AC adapter. Be sure to use the
AC adapter included with the print server.
6. Press and hold down the status sheet button on the print
server, then plug the AC adapter into the DC-IN connector on
the print server. Continue to hold down the status sheet
button for about 10 seconds.
Note:
It can take up to one minute to initialize the print server. When it’s done
initializing, its
STATUS
light turns green or orange.
7. When the print server is done initializing, press the status
sheet button again for about two seconds, to print the status
sheets. If the status sheets print, the print server is installed
correctly.
Caution:
Before disconnecting the print server from the printer, always turn off
the printer and unplug the AC adapter.
Status sheet button
Starthere.book Page 10 Thursday, September 11, 2003 2:55 PM
