Epson C11CH68401, User Manual

Page: 354 / 371

Controlling Using Protocols
You can print using a variety of pathways and protocols.
If you are using a multi-function printer, you can use network scanning and PC-FAX from an unspecified number
of network computers.
You can lower unintended security risks by restricting printing from specific pathways or by controlling the
available functions.
Controlling protocols
Configure the protocol settings.
1.
Access Web Config and then select the Network Security tab > Protocol .
2.
Configure each item.
3.
Click Next .
4.
Click OK .
The settings are applied to the printer.
Related Information
&
“Application for Configuring Printer Operations (Web Config)” on page 266
&
“Protocols you can Enable or Disable” on page 354
&
“Protocol Setting Items” on page 355
Protocols you can Enable or Disable
Protocol Description
Bonjour Settings You can specify whether to use Bonjour. Bonjour is used to search for devices, print, and so
on.
SLP Settings You can enable or disable the SLP function. SLP is used for push scanning and network
searching in EpsonNet Config.
WSD Settings You can enable or disable the WSD function. When this is enabled, you can add WSD devices,
and print from the WSD port.
LLTD Settings You can enable or disable the LLTD function. When this is enabled, it is displayed on the
Windows network map.
LLMNR Settings You can enable or disable the LLMNR function. When this is enabled, you can use name
resolution without NetBIOS even if you cannot use DNS.
LPR Settings You can specify whether or not to allow LPR printing. When this is enabled, you can print from
the LPR port.
RAW(Port9100) Settings You can specify whether or not to allow printing from the RAW port (Port 9100). When this is
enabled, you can print from the RAW port (Port 9100).
Administrator Information
>
Advanced Security Settings
>
Controlling Using Protocols
354