Epson C11CH68401, User Manual

Page: 224 / 371

❏
Select Fax > Fax Settings and then enable Direct Send .
Note that if you set Resolution to Super Fine or Ultra Fine but you send the fax without enabling
Direct Send , the fax may be sent at a lower resolution.
ECM setting is disabled.
Solutions
Select Settings > General Settings > Fax Settings > Basic Settings and enable the ECM setting on the
control panel. This may clear errors that occur due to connection problems. Note that the speed of
sending and receiving faxes may be slower than when
ECM is disabled.
An Image of the Reverse Side of the Original Appears in the Sent Fax
The following causes can be considered.
When scanning thin originals, images on the back may be scanned at the same time.
Solutions
Place the original on the scanner glass and then place a piece of black paper over it.
&
“Placing Originals” on page 35
The density setting is high when sending faxes.
Solutions
Select
Fax
>
Fax Settings
>
Scan Settings
>
Density
, and then lower the setting.
Received Fax Quality is Poor
The Image Quality of Received Faxes is Poor
The following causes can be considered.
Solving Problems
>
Printing, Copying, Scanning, and Faxing Quality is Poor
>
Received Fax Quality is Poor
224