Epson C11CG31201 User Manual Download Page 276

Page: 276 / 305

276

product's dial tone detection setting. (Turning off the dial tone setting may cause the product to drop
the first digit of a fax number.)

• If you connected your product to a DSL phone line, you must connect a DSL filter to the phone jack to

enable faxing over the line. Contact your DSL provider for the necessary filter.

• Make sure you installed the FAX driver for your product and that it is not paused.

• Try lowering your product's fax speed setting.

• Make sure the error correction mode (ECM) setting is turned on if you are trying to send or receive a

color fax.

• If your telephone line uses call waiting and you have trouble receiving faxes, turn off call waiting to

prevent disruption of incoming faxes.

• If you have subscribed to a call forwarding service, the product may not be able to receive faxes.

Contact your service provider for assistance.

Note:

If your product is connected to a VoIP (Voice over Internet Protocol) phone line, keep in mind that

fax machines are designed to work over analog phone lines. Epson cannot guarantee that fax
transmission will work when using VoIP.

If your phone line includes voice mail answering services, calls or faxes may be inadvertently received
by your voice mail service.

Parent topic:

Solving Faxing Problems

Cannot Receive Faxes with a Telephone Connected to Your Product

If you cannot receive faxes when a telephone is connected to your product, try these solutions:

• Make sure your telephone is connected to your product's

EXT

port.

• Make sure the Receive Mode is set to

Manual

Summary of Contents for C11CG31201


















































































































































































































































































































Search results

Summary of Contents for C11CG31201

Reviews:

Related manuals for C11CG31201

Brands by name

Popular brands

Epson C11CG31201, User Manual

Search results

Summary of Contents for C11CG31201

Reviews:

Related manuals for C11CG31201

Brands by name

Popular brands