Options and Consumables
133
6
6
6
6
6
6
6
6
6
6
6
Using the Pull Tractor
The optional pull tractor (C800382) provides optimum
continuous paper handling. The pull tractor is especially useful
with continuous multi-part forms and labels. For best results,
use the pull tractor with either the printer’s front or rear built-in
tractor, as described in this section.
Note:
When the pull tractor is installed, the tear-off feature is not available.
Installing the pull tractor
To install the pull tractor, you need a cross-head screwdriver.
Note:
If you are going to be using the pull tractor with the built-in rear
tractor, you should load paper onto the rear tractor before installing the
pull tractor. See “Loading Paper Onto the Rear Tractor” on page 22
for instructions.
1. Turn off the printer and open the paper separator cover.
