18
Matching Images for Multiple Projectors
You can adjust the projectors' images to minimize any differences in brightness or color. Use these
sections to adjust the image settings for each projector.
Before adjusting the images, make sure you have used the
Geometry Correction
settings to align the
projected images, and that both projectors are in the same
Color Mode
. In most cases, use the
Presentation
color mode for DuoLink installations.
To change the
Color Mode
setting, press the
Menu
button and select the
Extended
>
Multi-Projection
>
Color Mode
setting.
Adjusting Color Uniformity
Adjusting the Projector's Brightness Level
Matching the Image Colors
Adjusting RGBCMY
Parent topic:
Configuring Projector Settings for Multiple Projectors
Adjusting Color Uniformity
If the color tone is uneven on each screen, adjust the color tone balance in the Extended menu of each
projector. (The color tone may not be uniform even after performing color uniformity.)
Note:
If you cannot adjust color uniformity, make sure the
Color Mode
setting is not set to
Dynamic
.
1.
Press the
Menu
button on the remote or control panel, select the
Extended
menu, and press
Enter
.
Summary of Contents for BrightLink 685Wi
Page 1: ...DuoLink Setup Guide ...
Page 2: ......
Page 4: ......
Page 38: ...38 Parent topic Configuring Projector Settings for Multiple Projectors ...
