Note:
❏
If you are scanning multiple photos at once, position each photo at least 20 mm (0.8 inch) apart from the others.
❏
You can avoid cropping by moving the document about 2.5 mm (0.1 inch) away from the top and side edges
indicated by
A
and
B
in the following figure.
4.
Close the document cover gently so that your original does not move.
Note:
❏
Always keep the scanner glass clean.
❏
Do not leave originals on the scanner glass for an extended period of time as they may stick.
5.
Start Epson Scan 2.
6.
Select
Scanner Glass
from the
Document Source
list.
7.
Set the other items as necessary.
8.
Click
Scan
.
Notes on Using the Flatbed Scanner Dock
Place the Flatbed Scanner Dock on a horizontal and stable surface.
Notes on Scanning from the ADF
Depending on the length of the originals, operations for the input tray, the output tray, and the stopper vary when
scanning from the ADF using the Flatbed Scanner Dock. Do one of the following.
Note:
See the explanation for placing originals regarding other operations except for the input tray, the output tray, and the stopper.
Originals shorter than A5 (210 mm)
Open the input tray. Slide out the output tray, extend the output tray extension, and then raise the stopper.
User's Guide
Using the Flatbed Scanner Dock
80
