“Incorrect or missing colors” on page 180
“Blurry or smeared printout” on page 180
Horizontal banding
❏
Make sure the printable side of the paper is face up in the rear sheet feeder and face down in the
front paper cassette.
❏
Run the Head Cleaning utility to clear any clogged ink nozzles.
&
See “Cleaning the Print Head” on page 153.
❏
Use up ink cartridges within six months of opening vacuum package.
❏
Try to use genuine Epson ink cartridges.
❏
Check the ink cartridge status.
&
See “Checking the ink cartridge status” on page 137.
If the graphic displays the ink is low or expended, replace the appropriate ink cartridge.
&
See “Replacing an ink cartridge” on page 142.
❏
Make sure the paper type selected in the printer driver is appropriate for the type of paper loaded in
the printer.
&
See “Selecting the Correct Paper Type” on page 34.
Vertical misalignment or banding
❏
Make sure the printable side of the paper is face up in the rear sheet feeder and face down in the
front paper cassette.
❏
Run the Head Cleaning utility to clear any clogged ink nozzles.
&
See “Cleaning the Print Head” on page 153.
❏
Run the Print Head Alignment utility.
&
See “Aligning the Print Head” on page 156.
B-310N/B-510DN User’s Guide
Troubleshooting
179