Date :
1. How to remove the setting stem
The ''setting lever'' can not be push if the setting stem is not at normal position.
2. Attention for solar cell unit
Pay attention not to touch and scratch the surface of the solar cell.
3. Dial transparency rate
Keep the transparency rate of the dial more than 30%.
(Effective aperture is
φ
19mm)
Each elements of solar cell must be kept the transparency rate.
4. The guideline of charging time is as in below
(Dial transparency rate = 30%)
Illumination
(Lx)
Source of light
Environment
A
(Approx.
Hours)
C
(Approx.
Minutes)
700
Inside the office
−
100
3,000
30W 20cm
60
25
10,000
Cloudy
20
8
100,000
Fine weather
5
2
Condition A : Time required for full charge
Condition B : Time required for steady operation
Condition C : Time to charge 1 day of power
5. Caution
When removing the setting stem, put the setting stem at normal position and push the ''setting lever''
by tweezers. (Refer to the Fig.[0].)
Cal.
AS01A
Attention-01
24/Apr./'15
Rev. : 01
B
(Approx.
Hours)
15 minutes
1.5
4
35
A fluorescent lamp
Sun light
When charging the watch, do not place it too close to fluorescent lamp or other light sources as the
watch temperature will become extremely high, causing damage to the parts inside the watch.
Fig.[0]
P. 10-01
