4. Tilt the cover up slightly from the back and pull it toward you and away
from the main unit, as shown in Figure 3-3. Set the cover aside for now.
Figure 3-3. Removing cover
Inserting the Option Card
The video card must be placed in the 4
th
slot. Figure 3-1 shows the cor-
rect placement of a video card. Most other option cards can be placed into
any of the four remaining option slots, but some cards may need to be in-
stalled in a specific slot. Check the option card manual to find out if the
option card has to be in a specific slot.
Even though option cards are designed to fit only one way, it is a good
idea to examine the card first and follow the instructions closely.
1. Determine which option slot you are going to use, then remove the
retaining screw and washer from the metal cover plate at the back of the
slot. Lift out the metal cover and put it in a safe place in case you later
remove the option card. Keep the screw and washer to secure the option
card to the computer.
2. Unpack the option card and read all instructions that come with it.
Then adjust any switches or jumper connections that are necessary.
3-3
