Black
Yes
Cleans the toner in the toner cartridge.
No
*
Does not clean the toner in the toner cartridge.
*
Factory default menu setting
Machine life
Purpose:
To specify whether to continue print operations when the printer comes to the end of its service life.
Values:
Stop Print
*
Stops print operations at the end of service life.
Continue Print
Continues print operations after the end of service life.
*
Factory default menu setting
Note:
❏
When the printer no longer operates showing the error code 191-310 on the LCD panel, operate as
follows to keep using the printer:
- if a job is remaining, press the
(
Back
) button and the button at the same time.
- if there is no job, select
Continue Print
in this menu.
❏
Although you can keep using the printer after the end of its service life by changing the setting to
Continue Print
, the printing quality is not guaranteed.
Initialize NVM
Purpose:
To initialize the NVM for the printer settings, the Phone Book data for fax, and the Address Book data
for scan. Enabling this feature and rebooting the printer will reset all the printer settings and all the
Phone Book (fax) and Address Book (scan) data to their factory default values.
See Also:
“Resetting to Factory Defaults” on page 325
Values:
User Fax Section
Yes
Initializes the Speed Dial and Group Dial entries in the Phone Book.
No
*
Does not initialize the Speed Dial and Group Dial entries in the Phone
Book.
AL-MX200 Series User’s Guide
Using the Operator Panel Menus and Keypad
300
