Automatic Redialing
If the number you have dialed is busy or there is no answer when you send a fax, the printer will
automatically redial the number every minute for the number of times set in the redial settings.
To change the time interval between redials and the number of redial attempts, see “Redial Delay” on
page 285 and “Number of Redial” on page 285.
Note:
If you manually enter a fax number, the printer will not automatically redial the number.
Sending a Delayed Fax
You can use the Delayed Start mode to save scanned documents and transmit them at the specified
time to take advantage of lower long distance rates.
1. Load a document(s) face up on the Automatic Document Feeder (ADF) with the top edge going in
first; or place a single document face down on the document glass and close the document cover.
See Also:
❏
“Loading a Source Document on the Automatic Document Feeder (ADF)” on page 225
❏
“Loading a Source Document on the Document Glass” on page 226
2. Press the
(
Fax
) button.
3. Adjust the document resolution to suit your fax needs.
See Also:
❏
❏
4. Select
Delayed Start
, and then press the
button.
5. Select
On
, and then press the
button.
6. Enter the start time using the numeric keypad or press the or button to select the start time,
and then press the
button.
7. Select
Fax to
, and then press the
button.
AL-MX200 Series User’s Guide
Faxing
232